Konnex -EIB

The EIBus - Konnex Driver was designed specifically to get in communication with Building Automation Devices, connected through EIB bus, or with the new Konnex System, which is the compatible successor of EIB.

EIB devices, like lights, dimmer, lamps, curtains, switches, ..., have to be configured for their net address with the aid of the ETS software. In order to operate correctly with EIB devices, a good knowledge of the Konnex architecture and of the ETS software is required. For more information about this bus and the related tools, please  refer to www.knx.org

Our driver can operate in different ways:

• serial communication between the PC and a Bus Coupling Unit (BCU)  device, that represent the door of the EIB bus to the external world.

• USB communication between the PC and a BCU device.

• Ethernet communication, where the link between IP network and EIB devices are one or more EIBNet/IP routers.

Each communication channel requires a dedicated interface. See Requirements-Supported interfaces  for details.

Communication with the bus is performed by the Falcon Software, which is the KNX/EIB protocol stack for Windows. Be sure to have properly installed the Falcon software, before starting any communication between the supervisor and your Konnex system. Please see Software requirements for any further info.

Release

11.4.1.3 DBL269

Interface Device

Any Konnex/EIB devices

Manufacturer

Konnex

Requirement/Description

KONNEX- EIB - Falcon Library (Serial, Ethernet, USB) NEEDS ACTIVATION CODE

License Code

License Code Required

Import Tags

Support Import Tags

Operating System

• WIN 32/64

• WIN CE

Downloads

For more information on this driver please refer to the help relating to the driver in Movicon 11.