Driver
Dispositivi Supportati
Requisiti
Win32/64
WinCE
Download Help
***
Allen Bradley DF1
Rockwell Allen Bradley PLC-5, SLC-500, MicroLogix, ControlLogix, CompactLogix and FlexLogix
AB communication interface for multi-drop communication
x
x
Applicom
Various protocols supported by the APPLICOM card
APPLICOM communication board, APPLICOM library
x
BACnet/IP
Devices that support the BACnet/IP protocol
-
x
Beckhoff ADS TwinCAT
Beckhoff TwinCAT Systems
Beckhoff ADS software library
x
x
Bosch Rexroth MLPI
Bosch Rexroth devices that support MLPI interface technology.
The PLC requires a Bosch Rexroth library, dllmlpiwin32.dll, to complete the connection. The dllmlpiwin32.dll file must be present in the Supervisor directory or in a directory included in the “path” environment variable.
x
B&R PVI
B&R Devices
B&R PVI Libraries, Standard Ethernet or Serial Cable
x
x
CEI-ABI ElMo Ethernet
**
IEC protocol based on specifications 79/5 and 79/6, ELMO control unit with Ethernet interface
Standard Ethernet cable
x
CEI-ABI ElMo Serial
**
IEC protocol based on specifications 79/5 and 79/6, ELMO control unit with Ethernet interface
RS-232, RS-422 or RS-485 serial connection
x
CEI-ABI Notifier ENet Ethernet
**
IEC protocol based on specifications 79/5 and 79/6, NOTIFIER Am-2000/AM-6000 control unit
E-NET and ETH-C CPU Module
x
CEI-ABI Notifier Serial
**
IEC protocol based on specifications 79/5 and 79/6, NOTIFIER Am-2000/AM-6000 control unit
RS-232 or RS-485 serial connection
x
CoDeSys
3S Software CoDeSys SoftPLC versions 2.3 and 3.
To establish connection with PLC, you need to run a valid program and export the program symbols
x
Available for WEC7 only
Control Techniques Modbus
All devices communicate using standard Modbus serial protocol and Control Techniques drives support both Modbus serial protocol and CMP protocol.
-
x
x
Control Techniques Modbus TCP
All devices communicate using standard Modbus serial protocol and Control Techniques drives support Modbus TCP and CMP protocols.
-
x
x
COSTER C-BUS
*
COSTER devices that support the C-BUS protocol.
-
x
CTI TCP
CTI 2500 Series Programmable Controllers.
-
x
x
Digit Italia
**
-
-
x
ELKRON MP100
**
-
-
x
Elkron DigitItalia
**
Digit Italia Control Unit
RS-232 or RS-485 serial connection
x
Emerson SRTP
Emerson/GE 90 Series PLCs.
-
x
x
Energy Manager RMS621
**
-
-
x
EtherNet/IP
The EtherNet/IP protocol is supported by many independent vendors, however this driver has been tested for the following Allen Bradley PLC series: PLC5E, SLC500 /05 Ethernet, MicroLogix (with NET-ENI, ControlLogix, CompactLogix, FlexLogix5434
-
x
x
GE-Fanuc
GE Fanuc PLC 90 series, GE Micro series
CMM 311 serial communication coprocessor for the 90-30 series or CMM 711 for the 90-70 series
x
x
Guardall
**
Guardall Alarm Units, PX and QX Series
RS232 serial connection
x
Hilscher Profibus DP Master
Siemens S7-300 Series, Siemens S7-400 Series, VIPA 200V Series, VIPA 300V Series, VIPA 300S Series, VIPA 500S Series
The Hilscher MPI interface (Hilscher cards supporting PROFIBUS DP master) must be correctly mounted on the PC/panel.
x
x
Hilscher MPI
Siemens S7-300 Series, Siemens S7-400 Series, VIPA 200V Series, VIPA 300V Series, VIPA 300S Series, VIPA 500S Series
The Hilscher MPI interface (Hilscher cards supporting PROFIBUS DP master) must be correctly mounted on the PC/panel.
x
x
Hilscher Netlink
Siemens PLCs, S7 series 300 and 400, VIPA PLCs and compatible devices
Hilscher NetLink cable, SyCon software for configuring Netlink devices
x
x
Hilscher MPI
Siemens PLCs, S7 series 300 and 400, VIPA PLCs and compatible devices
Hilscher cards supporting PROFIBUS DP master + SyCon software for configuration
x
x
Hilscher DPM
Profibus-DP slave devices, such as digital I/O cards, analog I/O cards
Hilscher Profibus DP master cards + SyCon configuration software
x
x
Hilscher CIFX Fieldbus Multi-Protocol
Supported Protocols: AS-Interface, CAN open, CC-Link, CompoNet, DeviceNet, EtherCAT, POWERLINK, PROFIBUS-DP,PROFINET IO RT
Hitachi EH Series Devices, Hitachi EHV Series Devices
x
x
Hitachi
Hitachi H-Series Devices
Dedicated 15-pin cable
x
x
Hitachi Ethernet
Hitachi EH Series Devices, Hitachi EHV Series Devices
Standard Ethernet cable
x
x
IEC 60870-5-101U
RTU connected to a control station either via RS232 or RS485.
RS-232 or RS-485 serial connection
x
x
IEC 60870-5-104 TCP/IP
RTU connected to a control station or via TCP/IP network.
Standard Ethernet cable
x
x
IEC 60870-5-104 Server
All devices that support the IEC 60870-5-104 communication protocol as a control station and are compatible with the interoperability list described in this manual.
Standard Ethernet cable
x
IEC 61850 MMS Client
IEC 61850 MMS Server.
-
x
Johnson Controls 9100
**
Johnson Controls DX9100 and TC-9100 devices.
-
x
Jetter JetIP
**
The driver can be used to communicate with the following PLCs: Jet Control 241 (JC-241), Jet Control 243 (JC-243), Jet Control 246 (JC-246), Jet Control 647 (JC-647), JetMove
-
x
x
Kernel
**
Kernel Devices.
-
x
KNX EIBUS (Falcon)
Building automation devices that support EIB
EIB bus, Konnex system, Falcon libraries, BCU device or EIBNet/IP router
x
Lenze LecomAB
**
Lenze frequency converters
Lecom A/B communication module, RS232 connection or RS485 serial bus or fiber optic connection
x
x
LonWorks
Devices compliant with the LonWorks standard.
The driver uses an Echelon ActiveX to access the LNS server that stores the network description.
The ActiveX and supporting software are installed by the LonWorks configuration software.
x
Memory I/O
-
-
x
x
Mitsubishi Melsec A TCP
Mitsubishi PLC, A series
A1SJ71E71N-T Ethernet Module
x
MELSEC-FX Series
Mitsubishi MELSEC-FX and MELSEC-FX2N PLCs and compatibles
RS232/422 converter or Mitsubishi PLC programming cable (built-in RS232/422 converter).
x
x
MELSEC FX TCP Series
Mitsubishi FX3U PLC
FX3u-ENET Ethernet module, FX Configurator-EN software
x
x
MELSEC-Q Serial Format 1
Mitsubishi MELSEC-Q PLC
QJ71C24 communication module
x
x
MELSEC-Q TCP
Mitsubishi MELSEC-Q PLC
QJ71E71 Ethernet communication module
x
x
Modbus Serial
Serial devices that support the Modbus serial protocol
Standard Ethernet cable
x
x
Modbus Serial Slave
All communication devices that implement the standard Modbus serial protocol as master.
Standard Ethernet cable
x
x
Modbus TCP/IP
All devices that support the Modbus TCP/IP protocol
Standard Ethernet cable
x
x
Modbus TCP/IP Slave
All communication devices that implement the standard Modbus TCP/IP protocol as master.
Standard Ethernet cable
x
x
Moeller SUCOM
**
Moeller PS4-200, PS300 and PS400 series PLCs
RS232/485 converter
x
x
MQTT Client
Standard MQTT server (broker)
-
x
MTConnect
Any compatible MTConnect Agent (www.mtconnect.org)
-
x
Omron EtherNet/IP
The EtherNet/IP protocol is supported by many independent vendors, however this driver has been tested for the Omron NJ series PLCs.
Standard Ethernet cable
x
x
Omron FINS Ethernet
OMRON PLC
Standard Ethernet cable
x
x
Omron FINS serial
OMRON PLC
Omron serial cable
x
Omron Host Link
OMRON PLC
Omron serial cable
x
x
OVA Dardo plus
**
OVA DardoPlus emergency lighting controllers
RS232/RS485 Converter
x
Panasonic FP Mewtocol
Panasonic Matsushita NAIS-FP series PLC
FPWIN GR/PRO programming software for PLC configuration; FP-WEB Server or FP2 ET-LAN unit for Ethernet communication
x
x
Phoenix Contact Interbus
**
Remote devices
IBS PCI SC/I-T PCI card, Interbus cables, DDI library
x
x
Phoenix Contact PLCI
ILC 1x1 series
AXC 1xxx series (FW version 1.x, 2.x)
AXC 3xxx series
PC WORX RT BASIC/SRT
-
x
Available only with ARMV4I devices - WinCE7
Phoenix Contact PLCI BTP 2K
ILC 1x1 series
AXC 1xxx series (FW version 1.x, 2.x)
AXC 3xxx series
PC WORX RT BASIC/SRT
-
x
Available only with ARMV4I devices - WinCE6
Pixsys Soft-PLC
*
Pixsys LogicLab SoftPLC Devices
-
x
x
Siemens PC Adapter-MPI
Siemens S7 300 and 400 series PLCs, VIPA PLCs and compatible devices
Siemens PC adapter or MPI INAT adapter or VIPA green cable or compatible, standard serial plug and cable
x
x
Siemens PPI
Siemens S7 200 and compatible PLCs
Siemens S7 PPI or compatible PC adapter, standard serial plug and cable
x
x
Siemens S7 TIA Portal (Symbolic)
Siemens S7-1200 Series, Siemens S7-1500 Series
-
x
Available only for OEMs and Italian customers
Saia DATA Mode
All Saia PCD PLCs, provided they support the S-BUS protocol on the supported communication media, i.e. RS232/RS485 (S-BUS), Ethernet (SOCKET).
-
x
x
Saia Multiport Interface
PLC Saia PDC
RS232 cable for PGU mode; Ethernet LAN adapter or USB or RS485 adapter for S-BUS mode; Ethernet LAN adapter for ProfiS-BUS mode
x
Schneider Uni-Telway
**
Schneider Telemecanique PLCs and devices compliant with the Uni-Telway protocol
Intelligent RS232/RS485 converter (converter integrated in Schneider programming cable not supported)
x
x
Siemens S7 SAPI
**
Siemens S7 300 and 400 series PLCs and compatible devices
For MPI and PROFIBUS networks: Siemens CP board (CP5611, CP5613, CP5614), Siemens SAPI-S7 library
x
Siemens S7 TCP
Siemens PLCs, S7 200, 300, 400 series, VIPA PLCs and compatible devices
Siemens Ethernet Card
x
x
Siemens SINAUT ST1
Siemens SIMATIC devices equipped with modules that support the SINAUT ST1 protocol.
-
x
SNMP Manager
Devices that support the SNMP protocol and act as SNMP agents
Standard Ethernet cable
x
SoCom
**
SoftPLC ProConOS.
-
x
x
VIPA S7 TCP
Siemens PLC S7 series 200, 300, 400, VIPA system 200V, 300V, 300S
Standard Ethernet cable
x
x
VIPA embedded MPI
PLC VIPA System 100, 200, 300, Speed7; Siemens S7 300 and 400 series PLCs and compatibles
Standard Profibus or MPI cable
x
Available only with ARMV4I devices
VIPA PROFIBUS DP Slave
-
PROFIBUS DP Master configured to communicate with a Slave with the appropriate Input/Output modules
x
Available only with ARMV4I devices
WITS
EDR (Electronic Data Recorder) system
-
x
Yaskawa MPiec Modbus
All devices communicate using the standard Modbus TCP protocol: Yaskawa devices, PLCs, remote terminal units, analyzers, I/O modules, sensors, controllers, AC/DC drive control devices.
-
x
x
